RME OCTAMIC 8-Channel Mic Preamp (Used)

RME OCTAMIC 8-Channel Mic Preamp (Used)

The OctaMic includes extended features, turning it in more than just a combined, dual QuadMic. Thanks to sophisticated
discrete Class-A technology, both state-of-the-art microphone preamps offer a pristine sound. Lowest distortion,
excellent signal to noise ratio and perfectly linear frequency response transmit and amplify the microphone signals
truly unchanged. Additionally, detachable rack mount holders and full battery compatibility make the OctaMic the
perfect addition to (not only) the mobile Hammerfall DSP System.
OctaMic offers 8 balanced XLR mic / line inputs. Each channel contains switches for 48V phantom power, a low
cut filter and phase reversal. Amplification can be set between 10 and 60 dB. LEDs for signal, clip, and activated
phantom power give a complete overview on the unit’s status. When the special Clip Hold mode is activated, any
detected clip-state will cause the corresponding LED to flash once per second. With this, the user gets a long term
peak detection, and no longer needs to constantly watch the LEDs. At the same time momentary overloads are still
displayed correctly.
Frontside switches include power on/off and output level, for a choice of -10 dBV, +4 dBu or Hi Gain (+19 dBu)
as reference level. This unusual feature offers two advantages. First, the reference level can be easily switched to
match any of RME’s current interface devices, from HDSP 9632 through Multiface up to the renowned ADI-8 series
converters. Second, the Signal to Noise ratio is optimized, and the Clip-LED will exactly match the ones of the ADI-8
(2 dB below 0 dBFS).
The balanced line level output signal is available at the back of the unit via 8 stereo TRS jacks. The OctaMic also has a
25-pin D-sub connector, which allows for a direct and lockable connection to RME’s 8-channel converters ADI-8 PRO
and DS, with just one cable. Of course, this connector also provides the ability to use an industry-standard breakout
cable for 8 balanced XLR outputs. The included professional switching power supply offers safe operation world wide,
even when the power lines are weak or noisy.
Furthermore, the OctaMic is RME’s first unit to come in a completely re-designed housing. A new front panel
construction and design not only gives a much better look, but also higher stability. Detachable rack mount holders
and soft edges all around the unit are some of the new and useful details.