Panasonic Camera Control Unit for UC4000

Be the first to review this product

4K Camera Control Unit for UC4000
Support for ST 2110, Dante, NDI, SRT
Simultaneous BT.2020/REC.709 output
next-genSMPTE ST 2110 IP-transmission

£17,368.80 £14,474.00

Availability: Available to Order

SKU

AK-UCU700ESJ

Details

Panasonic Camera Control Unit for UC4000

The Panasonic AK-UCU700 Series is a 4K CCU with Enhanced IP Connectivity, Including Support for ST 2110, The Industry’s First Dante, NDI and SRT. The AK-UCU700 CCU supports the next-generation SMPTE ST 2110 IP-transmission standard as well as JPEG-XS to uncompress/compress 4K video by a factor of 10 without degrading quality. As the industry's first studio camera system to support the Dante network audio standard as well as the NDI (High Bandwidth NDI) and SRT (Secure Reliable Transport) IP transmission standards, Panasonic Connect's new CCU realizes diverse networks and applications for IP studio camera systems.

Specifications

More Information
SKU	AK-UCU700ESJ
Power	Power Supply: 100 V - 240 V AC, 50 Hz/60 Hz Capacity for Supplying Power to a Camera: 240 V AC , 1.46 A , 50 Hz / 60 Hz
Power Consumption	550 W (Without camera connected: 130 W)
Cable Type	Power
Input/Output	AUX Output: 3G/HD-SDI x 1 line Video Output: 3G/HD-SDI x 5 lines 12G/6G/3G/HD-SDI x 2 lines HD-SDI x 1 line Communication Intercom input/output (ENG / PROD, 0 dBm, 600 Ohms (4 W)/ 1 V [p-p], 200 Ohms (RTS), 4 W / RTS / CLRCOM) x 2 lines PGM input (0 dBm/600 Ohms) x 2 lines Tally input (Red, Green, Yellow) : 1 input each Microphone Output: 0 dBm/600 Ohms, 2 lines (XLR, 3-pin, male) LAN Trunk: 1 x Line MSU: RS-422; 1 x line, GPI for control Reference Input: BB (black burst)/tri-level: 1 x line (automatic termination, connect to upper connector; BB signal and tri-level signal automatically recognized, with loop-through output) Return Input: 3G/HD-SDI 4 lines Tally Output: Tally Output (Red, Green), Alarm Output, Open collector output each AK-UCU710: SFP+/SFP28 slot x 2 (for ST 2110 connection), AK-UCU700: SFP+/SFP28 slot x 2 (for ST 2110 connection) when AK-NP701G (sold separetely) is installed. AK-UCU700: RJ45 x 2 (Primary/Secondary) when AK-NP702G (sold separetely) is installed. RJ45 x 1 (for IP video streaming, SRT, and NDI) When AK-NP703G (sold separately) is installed
Weight	9.1kg
Dimensions	424 mm x 88.5 mm x 400 mm
Additional Info	Operating Temperature: 0 to 40 C (32 F to 104 F)
In The Box	1 x Panasonic Camera Control Unit for UC4000