Hedbox RP-DC50-D Sony BP-U Style Battery Charger with 2x Sony plates

Hedbox RP-DC50-D Sony BP-U Style Battery Charger with 2x Sony plates

Set Include: 1 x RP-DC50 Dual Battery Charger 2 x Battery Charger plate RP-DBPU 1 x 110V / 240V Power Cable (Cable with US, EU or UK plug) 1 x 12V Car Power Cable 1 x User Manual QR Code

The Hedbox RP-DC50 Dual Battery Charger features a large backlit LCD screen with readouts that give you a clear understanding of the status information of any connected battery, USB output and DC 12V input.

Dual charging plates allow for either one or two batteries to be charged simultaneously, while an Intelligent Control MCU can automatically identify the voltage and number of batteries fitted to the charger and prevent overcharging regardless of the operating mode selected. Fully interchangeable battery plates allow the RP-DC50 to be used to charge virtually any type of battery.

Implemented Back-light
With an implemented back-light in the large LCD screen, the readout function is enabled in the dark, giving you the possibility to use the charger at any place and at any time.

Large LCD Display Screen
A large LCD screen provides clear, accurate, and precise display of the charging status. The USB output and DC 12V input display charge mode provide a clear insight into the way in which the charging mode is used to charge your professional battery. With an implemented backlight, the readout function is enabled in the dark.

Dual Bay Charging Option
The charger have possibility to charge One or Two Batteries Simultaneously in the same time. Intelligent Control MCU can automatically identify the voltage and number of Batteries that is put on the charger, going intelligent charge when being charging, and prevent overcharge, depending if you chose Boost or standard charging mod on Boost push button.

Charging Technologies
Intelligent charging systems integrate the control systems within the charger and the electronics within the battery to allow precision control over the charging process. As a safety precaution with high-capacity batteries, a precharging stage is used. The charging cycle is initiated with a low current. If there is no corresponding rise in the battery voltage, it indicates that there is possibly a short circuit in the battery (zero volt activation).

Constant current/constant voltage (CC/CV) charging mode is an effective way to charge lithium batteries. When a lithium battery is nearly empty, we take constant current to charge it. Charger CPU automatically adjusts charging current to be lower than the max charging current that the battery can accept. With constant charging, the voltage of the battery rises slowly until it reaches a maximum voltage at which point the charger switches the charging method to “constant voltage” and reduces the charging current. When the battery is fully charged, this state is stopped.

Charging Time
Intelligent Control MCU can automatically identify the voltage and number of batteries that are on the charger, and prevent overcharge depending of the charging mode that is selected. In HIGH charging mode, one professional battery like the HED-BP75D with 74.88 Wh will be charged in approximately 3.5 hours. Two HEDBP75D will be charged in approximately 6.5 hours. In LOW mode, the charging time for a single battery is 5.2 hours or 10.2 hours for two batteries.