Flowcine SERENE Spring Arm for Use/Modification of Easyrig (Used)

Flowcine SERENE Spring Arm for Use/Modification of Easyrig (Used)

The Serene is a patent pending two axis spring arm that attaches at the end of the Easyrig (2/2.5/3 or Vario5) arm. It stabilises vibrations and motion errors on the vertical axis that comes from walking or running with the rig. It also stabilises side to side errors in the same scenarios by counter pivoting around it’s center axis. At the same time you have full use of the Easyrig cord extension that will allow you to go from high to low mode while at the same time the Serene will take care of the vertical and side to side stabilisation adding two more stabilised axis to your existing system.

The Serene can take camera setups between 6-19.5 kg, and you can easily fine tune the spring tension without tool. Of course it works great with the Gravity One, but it also works really well for other gimbal rigs like the Freefly MoVI, DJI Ronin, Letus Helix and most other leading gimbal rigs.

The Serene has quickly become a ”must-have” item for any Easyrig user. After its introduction in autumn of 2014 around 10% of all Easyrig users already adapted their Easyrig with a Serene. This number steadily increases as using the Serene together with a gimbal becomes more and popular.

The Serene mounts at the very end of the Easyrig upper support arm, and the string is routed upwards and through the Serene instead of the normal way straight down from the tip of the Easyrig. To make this happen you have to slightly alter your Easyrig arm with one or two holes (depending on Easyrig model). This is a fairly easy operation, that most users can do themselves. We supply a drill template piece for exact placement of the holes. If you feel uncomfortable doing it you can send in your arm to us for modification or get help from your local distributor.