DJI RS 4 RS 3 Riser Kit for 15mm Baseplate Canon C70
Set up the Canon C70 for 15mm LWS configurations with the ability to quickly switch between the DJI RS 4/RS 3 & the LeftField 15mm LWS Baseplate.With the included RS 4 dovetail plate, transitioning from gimbal to tripod or handheld is seamless. Quickly release between setups without the need to dismount or swap plates.
For DJI RS Gimbals
The dovetail is compatible with the RS series of gimbals from DJI including the latest RS 4 Pro, RS 4 and RS 3 Pro & RS 3, allowing it to be loaded directly onto the gimbal without the need to change camera plates. The extra length provides ample room for balancing & adjustment. Laser etched markers along the length of the dovetail let ACs mark down balanced positions on the gimbal.
Support for Accessories
Lens adapters can be secured using the front channel and supplied screws. Three M4 points can be used to mount the DJI Focus Motor Rod Mount.
Compatibility
The DJI gimbal plates ship from the factory with washers of varying thicknesses. While these variations work fine with DJI’s own plate, they may cause clearance issues with the Bright Tangerine DJI compatible plates. This is due to the low-profile design of the protruding support and anti-rotation features, which are crucial for securing the camera.
If you are finding that the bottom of the Bright Tangerine DJI plate is hitting the grey clamp lever and preventing fore and aft slide, you can swap the original washer out with the thinner one supplied in this kit. This will lower the grey lever sufficiently to clear the Bright Tangerine DJI plate. Please note, the use of the thinner washer in this kit will not impact the use of any other baseplates on the DJI camera plate.
| SKU | B4005.0034 |
|---|---|
| In The Box | 1 x DJI RS 4 & RS 3 Dovetail for Canon C70 1 x DJI RS 4 & RS 3 Riser for Canon C70 |