Bright Tangerine KipperTie Revolva/Adapta RF Support for RED Komodo

Bright Tangerine KipperTie Revolva/Adapta RF Support for RED Komodo

Features

• Contoured Design – The supports are custom-designed to specifically fit the adapter.
• Secure Support – The bracket completely locks off any flex or wiggle from camera or adapter
• 4-Point Harness – The support mounts to LeftField side rails, top rail and the adapter.
• Quick Installation – The lens support is simple to install and remove when swapping mounts & adapters.
• Interchangeable Design – This support bracket can be used with other LeftField Adapter Supports for the RED KOMODO.

LeftField Adaptor Supports for the RED KOMODO are a system of custom-made adaptors for use with third-party lens mount adaptors. They provide a completely rigid mount, and are interchangeable.Rigid support in any situationSecuring your adaptor is vital to eliminate movement which can cause issues with back focus, lens calibration and shim configuration. The LeftField Adaptor Supports create a 4-point harness by connecting to the adaptor which is then secured to both the left, right, and top rails anchored to the camera. This secures the adaptor against forces in any axis of movement, whether the camera is moving at 100mph on a tracking vehicle, doing pans on a tripod or in a fast-paced handheld situation.What you’ll need:You’ll need the LeftField Side Plate Kit (B4002.0015) & Top Rail (B4002.1007) or Run/Stop Top Rail (B4002.1027).

Unlike other mount support systems, the LeftField Adaptor supports don’t require the baseplate to be attached, so it can be used on minimal camera builds for handheld, aerial and gimbal work. When using larger lenses, we still recommend using a lens support, such as rods, to remove any flex from the lens to the mount.What’s Included:The supports come with the required mounting hardware for each adaptor.

Machined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability. Every adaptor is laser-engraved to be quickly identified for the job. Every LeftField Adaptor Support is supplied with our famous Bright Tangerine Support and the addition of a 5-year warranty.

Compatibility

The Lens Adaptor Support is compatible with the Metabones ARRI PL to Canon RF-mount T Cine Adaptor (MB_PL-EFR-BT1), but is not compatible with the Metabones Canon EF Lens to RF-Mount T CINE Speed Booster Ultra 0.71x Adaptor (MB_SPEF-EFR-BT1) or the Metabones ARRI PL Lens to Canon RF-mount T CINE Adaptor S (EOS R) (MB_PL-EFR-BT2).Metabones Speed Boosters are not compatible with the Lens Adaptor Supports. Instructions:The RF mount on the Komodo is a sprung mount system, and relies on small springs inside the mount to pull the adaptor into the right place.

If the adaptor support is installed incorrectly, it can result in the lens adaptor being pushed or tilted in the wrong direction, which can result in focus and other optical issues.