Bright Tangerine Sony FX6 Monitor Bracket

Bright Tangerine Sony FX6 Monitor Bracket

The Sony FX6 Monitor Bracket contains everything you need to replace the original mount for your Sony FX6 monitor with a standard 15mm rod based setup. It opens up the mounting options for the monitor, maintains the horizon level and is sag-free when using the FX9 Loupe.

This kit includes the Sony FX6 8T NATO Rail, Monitor Holder, Cable Hook, 15mm Rod Mount & a 15mm Drumstix Rod (3-inch/7.6cm).

Lightweight and Compact Monitor Mount for FX6

The monitor holder is custom matched to the FX6 monitor, with a 3/8” thread. The included 15mm rod adapter can be attached to mount the monitor on any 15mm rod or onto an articulating arm for alternative mounting. The kit includes a single 3” (7.6cm) Drumstix rod and is interchangeable for longer lengths if needed. This provides the lateral positioning as well as the tilt adjustment.

Sony FX9 Loupe Support

When operating with the FX9 Loupe, the clamps can be locked off securely, supporting the weight of the eyepiece, preventing it from sagging.When transporting the camera, the monitor can be folded into the stowed position. The included cable hook prevents the cable from snagging.

Cable Hook Installation

To install the cable hook, you will require a small Philips screwdriver. First, remove the original cover by undoing the screw on the side. Place the cable hook onto the monitor and secure with the longer M2 screw provided.

No Compromises

Machined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability.

Features

• Light, compact monitor mount for Sony FX6
• Allows for side to side/tilt adjustment
• Provides NATO-compatible rail/15mm rod clamp
• Supports FX9 Loupe and maintains horizon level
• Monitor can be folded/stowed away for transport