Anton Bauer D-Box Battery Bracket for Canon C700 (V-Mount)

Anton Bauer D-Box Battery Bracket for Canon C700 (V-Mount)

The Anton Bauer D-Box for Canon C700 features a V-Mount and adds power distribution, standardized remote start/stop, and hot swap capability to the Canon C700.

The unit attaches directly to the back of the camera body using a special Molex connector eliminating external cabling. It also interfaces with the rear LANC port which is how the D-Box controls the camera's run/stop. Connectors on the D-Box are contoured in line with the Canon C700 body, streamlining port connections and cable management.

The module also provides 2 x 3-pin Fischer ports, allowing start/stop with any ARRI standard trigger device. The D-Box is equipped with a RED 6-pin LEMO compatible DC Input allowing an AC power supply or external power plate to be connected to power the camera and accessories during a battery change. When both battery and DC input are utilized, the D-Box defaults to the DC input, leaving the battery fully charged.

D-Box Connections:

• D-Tap - 12V Unregulated
• USB - 5V Regulated
• 2-pin LEMO compatible connector - 12V Unregulated - ARRI standard wiring 
• 2-pin LEMO compatible connector - 12V Unregulated - ARRI standard wiring
• 3-pin Fischer - 24V Regulated
  • Regulator built in to convert battery voltage to 24V - Maximum 2A continuous (3A surge) shared between the 2x 3-pin Fischers
  • ARRI standard start/stop capabilities
• 3-pin Fischer - 24V Regulated
  • Regulator built in to convert battery voltage to 24V - Maximum 2A continuous (3A surge) shared between the 2x 3pin Fischers
  • ARRI standard start/stop capabilities
• DC Input - 12-16V - RED 6pin LEMO compatible DC Input XLR
  • Priority is given to DC Input to preserve battery charge when both sources connected.