AJ-P2AD1G microP2 adapter

Panasonic Micro P2 to Express P2 Card Adapter

The AJ-P2AD1G microP2 Memory Card Adapter from Panasonic enables users to adapt the microP2 cards to the full-size P2 card slots in camcorders. Since these are the same size as SD memory cards, you can also use many 4-128GB Class 10 SDHC/SDXC cards in this adapter, with interval rec, one-shot rec, loop rec, and one-clip rec disabled (some cards may not be usable).

Furthermore, the AJ-P2AD1G features maximum read speeds of 1Gb/s and can write at up to 100Mb/s using the AVC-intra100 recording format (excluding 60p/50p), available when using microP2 cards only. When using SDHC/SDXC cards, you have access to DV, DVCPRO, DVCPRO50, and AVC-Intra50 formats, the last two of which allow for 50Mb/s maximum write speeds. Additionally, the adapter has CPS password protection. It requires a firmware upgrade of current P2 hardware.

• Only the DV, DVCPRO, DVCPRO50, and AVC-Intra50 recording formats can be used when using the Memory Card Adapter on P2 Series products.
• Memory cards of Class 10 or higher are recommended, but recording may not be possible with some cards.
• DVCPRO HD and AVC-intra100 cannot be used.
• Memory card data capacity must be 4 GB or more and 128 GB or less.
• Interval Rec, One-Shot Rec, Loop Rec, or One-Clip Rec cannot be used.
• If the reading performance is insufficient during playback, frames might be skipped (Best-effort playback).
• When copying clips that extend over two SDHC/SDXC memory cards onto another SDHC/SDXC memory card, the connecting relationship between the cards will not be saved. Under certain conditions, the connecting relationship between original and copied SDHC/SDXC memory cards is saved.

Features

• Adapts Micro P2 to Express P2
• Max. Read: 1Gb/s Write: 100Mb/s
• CPS Password Protection
• Accepts Class 10 SDHC/SDXC Cards