The 9-bladed iris produces pleasing out-of-focus bokeh effects, and ghosting and flaring have been minimized. Color reproduction is standardized for easier color correction. Each lens in the range offers consistent lens gear positions and 180° of focus barrel rotation. The FF High-Speed Primes also feature a clickless iris with linear markings, dampeners on each gear ring for silent operation, industry-standard 0.8 module gear pitch, and engraved markings for durability. What sets this lens apart from the standard Sigma High Speed Primes is fully luminescent markings. When shooting in dim or dark environments, focus pullers and camera operators will be able to easily discern lens markings without resorting to distracting lamps or other disruptive light sources.
To relieve stress on your camera's lens mount, a support foot is built into the dust-resistant and water-resistant metal lens body. If you wish to fit your FF High-Speed Prime lens to a different camera, the Canon EF and Sony E mount versions can be converted from one to the other by an authorized Sigma service center (not available for PL mounts).
- High image performance covering full-frame sensors; suitable for 8K capture.
- Fast T1.5 maximum aperture aids in shooting with low light levels.
- Compact, dust-resistant, and water-resistant design with a common front diameter of 95mm across the line.
- Canon EF and Sony E mounts may be swapped at an authorized Sigma service center (not available for PL mounts).
- The main lens markings are in luminous paint for easy visibility in low light situations. The intermediate markings are laser-engraved for durability. The focus markings are readable from either side of the lens.
|Sigma 40mm T1.5 FF (m) Specs|
|Lens Mount||Sony E|
|Image Circle||43.3 mm|
|Horizontal Angle of View||Full Frame: 48.5°|
|APS-C (1.5x): 33°|
|Minimum Focus Distance from Image Plane||15.7" / 0.40 m|
|Gear MOD & Pitch||Focus: 0.8 MOD / 32 Pitch|
|Iris: 0.8 MOD / 32 Pitch|
|Front Diameter||95 mm|
|Filter Thread||82 mm|
|Lens Support||Lens Support Foot with 1/4"-20 Mounting Thread|
|Length||6.18" / 157 mm|
|Weight||3.6 lb / 1620 g|
Rear Lens Cap
Front Lens Cap