Unique SDI and HDMI sync-free side by side configurations
The LMD-B240 offers unique SDI and HDMI sync-free side by side configurations, whereby HD, SD, different frame rates, interlace, PsF and progressive pictures can by displayed on the same monitor. The signal processing of this feature is close to its low latency of a single screen. Focus assist and camera metadata can work with the main picture when using this function.
Lightweight and compact with lower power consumption
The LMD-B240 has a low 6.5kg mass (with stand), 6.4kg (monitor only) and 41W (maximum) power consumption.
Optimised low-latency I/P conversion
The I/P conversion system delivers automatically optimised signal processing according to input signals with low-latency (less than 0.5 field). This system helps users to edit and monitor for a live production.
Video input versatility
The LMD-B240 monitor is equipped with built-in standard input interfaces: HD/SD-SDI (x2), HDMI (HDCP) input (x1) and composite (x1).
Computer input versatility
Multiple computer signals can be received via an HDMI/DVI interface; the resolution range is from 640 x 480 to 1680 x 1050 pixels.
Waveform monitor, vector scope and audio level meter display
An input signal’s waveform and vector scope with an SDI-embedded 2-channel audio level meter can be displayed on screen. The waveform of a specified line can also be displayed. In conjunction with the Picture & Picture function, the waveform monitor and vector scope display can monitor two camera signals. In addition, an audio level meter can display the embedded audio signal from the SDI or HDMI input. It can display on screen the ch1 to ch8 or ch9 to ch16.
Front stereo speakers
2W+2W front stereo speakers are more powerful than a monaural speaker or a rear speaker system and you can get a good stereophonic effect from them. You can select audio sources from either embedded audio or analogue audio.
User-friendly operability and user interface
This monitor has an intuitive and appropriate user interface for a video production. You can easily choose an input and a function by a single click. The rotary encoder knob makes it easy to select an item and enter it. The lighted control panel has a good readability in dark. This user interface including OSD menu layout is carefully designed for a time critical op
|Panel||a-Si TFT Active Matrix LCD|
|Picture Size (Diagonal)||604.7 mm (23 7/8 inches)|
|Effective Picture Size (H x V)||527.04 × 296.46 mm|
20 3/4 x 11 3/4 inches
|Resolution (H x V)||1920 x 1080 pixels (Full HD)|
|Colours||Approx. 16.7 million colours|
|Viewing Angle (Panel Specification)||89°/89°/89°/89° (typical) (up/down/left/right contrast > 10:1)|
|Normal Scan||0% scan|
|Composite Input||BNC (x1), 1 Vp-p ±3dB, sync negative|
|SDI Input||BNC (x2)|
|HDMI Input||HDMI (x1) (HDCP correspondence)|
|Audio Input||Stereo mini jack (x1), -5 dBu 47 kO or higher|
|Parallel Remote||RJ-45 Modular connector 8-pin (x1) (Pin-assignable)|
|DC Input||XLR-type 4-pin (male) (x1), DC 12 V to 17 V (output impedance 0.05 O or less)|
|Composite Output||BNC (x1), Loop-through, with 75 O automatic terminal function|
|SDI Output||BNC (x1)*, output signal amplitude: 800 mVp-p ±10%, output impedance: 75 O unbalanced|
*Output from SDI 1 only
|Audio Monitor Output||Stereo mini jack (x1)|
|Speaker (Built-in)||2.0 W+2.0W (Stereo)|
|Headphone Output||Stereo mini jack (x1)|
|Power Requirements||AC: 100-240V,0.5-0.3A,50/60Hz|
|Power Consumption||Approx. 41W (max.)|
Approx. 29W (average power consumption in the default status)
|Inrush Current||(1) Maximum possible inrush current at initial switch-on (Voltage changes caused by manual switching): TBA A peak, TBA A r.m.s. (240V AC)|
(2) Inrush current after a mains interruption of five seconds (Voltage changes caused at zero-crossing): TBA A peak, TBA A r.m.s. (240V AC)
|Operating Temperature||0°C to 35°C (Recommended: 20°C to 30°C)|
32°F to 95°F (Recommended: 68°F to 86°F)
|Operating Humidity||30% to 85% (no condensation)|
|Storage/Transport Temperature||-20°C to +60°C -4°F to +140°F|
|Storage / Transport Humidity||0% to 90%|
|Operating / Storage / Transport Pressure||700 hPa to 1060 hPa|
|Dimensions (W x H xD) *1||563.0 x 375.3 x 69.0 mm (without monitor feet)|
563.0 x 397.6 x 165.0 (with monitor feet)
22 1/4 x 14 7/8 x 2 3/4 inches (without monitor feet)
22 1/4 x 15 3/4 x 6 1/2 inches (with monitor feet)
|Mass||Approx. 6.5kg (14Ib 5oz)|
Approx. 6.5kg (14 Ib) (when the monitor stand is removed)
*1 The values for dimensions are approximate.
• AC plug holder (1)
• Before Using This Unit (1)
• CD-ROM (1)