More Views

  • DJI RONIN-M DJI Ronin-M Lightweight 3-Axis Stabiliser
  • DJI RONIN-M DJI Ronin-M Lightweight 3-Axis Stabiliser

DJI Ronin-M Lightweight 3-Axis Stabiliser


DJI RONIN M - 3-axis lightweight stabiliser gimbal.
Weighing just 5 pounds (2.3kg), about half the weight of the original Ronin, the slimmed down Ronin-M is small enough to fit into your backpack and take anywhere, yet strong enough to support camera setups weighing up to 8 pounds (3.6kg).

Be the first to review this product

Sorry, this product is now discontinued and cannot be ordered

You may find a compatible alternative by clicking one of the categories below :

* Camera Stabilisers & Gimbals | Visual Impact
* NAB 2015

DJI RONIN M - Lightweigth 3-Axis Gimbal Stabiliser for DSLR's and mirrorless cameras like the Sony A7s, Panasonic GH4, Canon 5D Mark III.

The DJI Ronin was and still is one of the most popular 3-axis gimbal stabiliser systems available today. With its high payload capacity, camera operators can easily fly a Canon C300, FS7's or even RED Epics. However, the added weight required to run with such cameras made the gimbal a bit on the heavy side and required usually additional support in order to operate for prolonged periods of time. The RONIN M supports camera/lens payloads of up to 8 lbs, or 3.6 kg, and features tool-less adjustment throughout.

Users with smaller cameras like the Blackmagic Pocket Cinema camera or the Sony A7s, could still use the bigger RONIN, but it is generally considered overkill for such small and lightweight cameras. And this is why DJI came up with the new, smaller "brother" to the RONIN - the RONIN M.

The RONIN M was specifically designed with smaller and lightweight cameras in mind. Easy to balance just like the original RONIN, the RONIN M is small enough to be packed in a carry-on or a backpack and users can get buttery smooth shots in a matter of seconds.

Undersling and Briefcase modes, as well as upright modes are available on the RONIN M as well. Capturing tracking shots at eye level is a great option for getting realistic and smooth shots. For those needing those low-angle smooth "footsteps" or "skateboard" shots - the briefcase mode can help you get those shots.

Save time and start shooting professionally stabilized video in under 5 minutes. Mount your camera to the Ronin-M, quickly balance it, and then tap a button. The upgraded ATS (Auto Tune Stability) technology is more precise than before and completes the tuning and balancing processes with no tools necessary. Easy and efficient.

Capture tight shots, even when you have almost no space to work, and easily transport your Ronin-M. The top handle bars quickly and easily twist off, allowing you to minimize its size, achieve different shooting configurations, and pack or unpack it in seconds.

Your Ronin-M stands up to rugged use in any filming environment. Featuring a superbly strong and rigid magnesium frame, the Ronin-M brings increased stiffness and reduced weight. Notoriously difficult to manufacture and mold, magnesium brings you a new, more exact shooting experience while maintaining easy maneuverability and increasing options on set.

Increased rigidity is provided by a single, complete piece of fine-tooled magnesium that forms the U-shaped arm holding the camera plate. Only made possible by DJI’s large manufacturing reach and expertise, this unified design eliminates imperfections that are common in systems made of multiple pieces assembled together. This arm gives you not only greater stability but also reliability, as there is no po

Image Sensor
Built-In Functions1. Three Operation Modes
· Underslung Mode
· Upright Mode
· Briefcase Mode
Built-in, independent IMU module
DJI Specialized Gimbal Drive Motors with Encoders
Bluetooth Module
USB Connection
2.4GHz Receiver
Temperature Sensor
DJI Advanced 32-Bit DSP Processor
D-Bus Receiver Supported
Camera Tray DimensionsMaximum depth at center of mass on camera base plate: 120mm
Maximum height measured from top of camera base plate: 195mm
Maximum width: 160mm
Accessory Power Connections12V Regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1
GCU Input Power4S Ronin-M Battery
Connections2.4GHz Remote Controller, Bluetooth 4.0, USB 2.0
PC Assistant Software RequirementsWindows XP SP3; Windows 7; Windows 8 (32 or 64 bit);Mac OS X 10.9 or above
Mobile Assistant Software RequirementsMobile Device: iOS 7.0 or above
Mechanical & Electrical Characteristics
Working Current· Static current: 300mA (@16V)
· Dynamic current: 600mA (@16V)
· Locked motor current: Max 10A (@16V)
Operating Temperature-15° C ~ 50° C (-5° F ~ 120° F)
Recording timeDepending on card used and resolution/ bit rate selected
Weight2.3kg (5.07lb) fully loaded with handlebar
Gimbal Dimensions500mm(W) x 210mm(D)x 420mm(H)
Load Weight (Reference Value)3.6kg (8lb)
Angular Vibration Range± 0.02°
Maximum Controlled Rotation Speed· Pan axis: 90°/s
· Tilt axis: 100°/s
· Roll axis: 30°/s
Mechanical Endpoint Range- Pan axis control: 360°
· Tilt axis control: +105° /-165°
· Roll axis control: ± 110°
Controlled Rotation Range· Pan axis control: 360°
· Tilt axis control: +105° /-165°
· Roll axis control: ± 25°
1 x Ronin M 3-Axis Stabiliser Gimbal
1 x Handle Bar
1 x Remote Control
1 x Tuning Stand
1 x Charger
1 x Smart Battery
3 x Cables
2 x Plug Adapters
1 x Micro USB Cable
1 x Camera Mounting Plate
1 x Extension Rod Holder
6 x Adjustable Length Extension Rod
Accessories Pack