The Hypercore NEO Slim 98Wh Lithium-Ion Battery from Core SWX is a compact 14.8V, 98Wh lithium-ion V-mount battery that supports a constant 12A draw and peak draw of 16A. With this high output, the battery is designed for cine and broadcast applications, but, of course, it can be used for virtually all other applications as well. At only 1.5" thin and weighing just 1.4 lb, it's also highly suited for gimbal, drone, and other mobile applications. The Hypercore NEO Slim has the ergonomic design, large backlit LCD, and protective over-molded rubberized housing that Hypercore batteries have come to be known for over their past releases.
Like previous Hypercores, the battery is microprocessor-driven, ensuring safety and runtime delivery to camera viewfinders or LCDs; but, leveraging the microprocessor, the NEO Slim features an RFID transmitter on the front that lets you monitor the stored battery data via Core SWX's VoltBridgeID iOS app or an RFID reader. Furthermore, the battery has a modular design consisting of less cabling, allowing for increased quality. With the different parts installed separately and securely inside the housing, the chance of failure is reduced in case of drops, and servicing the battery becomes a simpler, more efficient process as the different parts install plug-and-play.
In addition to the large LCD, the Hypercore NEO Slim has an LED gauge on the side where the user can easily glance over at it. Other features include 2000 charge/discharge cycles, hibernation mode, and the ability to communicate to cameras as well as chargers with both one-wire and two-wire protocols. Such an advanced battery wouldn't be complete without peripheral support. The Hypercore NEO Slim provides a SmartTap D-Tap port and a USB port for powering/charging devices. The SmartTap port lets you power any 12 VDC accessory and transmit battery data if the accessory is able to communicate that information.
The Hypercore Slim is also widely compatible with many different chargers. This V-mount version is compatible with RED, IDX, and Sony V-mount chargers, among others.
High Current Delivery
NEO 16 Amp Peak with 12 Amp draw
Through USB Neo packs are now firmware upgradeable
UN28.3 certified & travel safe battery pack to make customers travelling experience go as smooth as possible
View your battery vitals from mobile app or RFID reader
All Hpercore packs have a Modular Build design. The design reduces wiring and ensures the maximum build integrity
New backlit LCD is mulitpurpose. It provides nominal runtime based off of 25w load, remaining runtime once connected to a device and remaining charge time when on a charger
To protectself-discharge and help comply with travel regulations, Core SWX incorporated storage mode into all brick battery packs
The packs are incased in an over molded non slip rubberized housing to help provide cell protection against accidental impacts
2K Cycles 2Y Warranty
Rated for 2K Cycles with a 2 Year Warranty
With the display on the side of all brick battery packs, a user can easily glance at remaining battery capacity
Integrated "Smart" p-tap connector to allow users to power any 12vdc device while also receiving all battery data from the port
Able to communicate to cameras as well as chargers with both one-wire and two-wire protocols
Core SWX packs are the most charger compatible in the industry which allows users with existing charger hardware to continue using their charger
NEO battery packs offer a 5v USB port for any accessory on set that may use USB or to even charge mobile devices
The packs go to sleep/hibernate when there is no battery usage or movement after a 48 hour period. Once the battery is picked up, the battery pack awakens
Normal Runtime: (25w) 3.6hrs.
Dimensions: 3.8” x 5.87” x 1.49”