UWP-D digital audio processing for high quality sound
The UWP-D Series wireless microphone systems uses Sony Digital Audio Processing to improve sound quality and transient response performance compared to conventional analogue wireless systems. It provides superb transient response performance. Analogue companding systems cannot accurately reproduce sounds such as a bell, tee shot or handclap, but Sony Digital Audio Processing reproduces them faithfully.
External mic input for additional wired microphone with 3 channel Mixer function
The URX-P03D 2-channel portable receiver has an external mic input connector for additional wired microphones. Sony microphones with BMP plug or plug-in power microphones (stereo/mono) are applicable by menu setting. It also has a 3 channel mixer function for the two wireless microphones and one wired microphone. It can assign output 1 or/and 2 freely.
Large display and small size receiver
This receiver is designed to fit even small camcorders or DSLR cameras, with dimensions of 63mm x 82mm x 28.4mm (W x H x D) and a weight of approx. 210 g (including batteries). The transmitters and receivers also feature a bright 11.5mm x 27.8mm display, significantly larger than previous UWP models to make them easily readable in all situations.
Fast and easy channel scan
With its Clear Channel Scan, Active Channel Scan function and IR Sync features, the system detects unoccupied channels and selects the most appropriate channel automatically, for fast and easy system setup.
Automatic channel setting mode
The Auto Set channel mode allows the user to find and set available frequencies to use within the operating frequencies of the system. The receiver will automatically set the transmitter channel using the IR Sync feature.
Wide frequency coverage
The extra wide switching bandwidth covers a wide area, with a wide choice of channels available across multiple models - please refer to product specifications for more information.
True Diversity reception system
The UWP-D system achieves exceptionally stable audio signal being delivered from two independent receiver sections within the unit. Optimum signal quality is delivered by the two receivers sections and a comparison circuit constantly pulls the one with the best signal to give dropout free transmission.
Compatibility with Sony 800 and UWP Series analogue audio receivers
The UWP-D Series transmitters and receivers are also
|Oscillator Type||Crystal-controlled PLL Synthesizer|
|Reception Type||Space diversity*|
|Antenna Type||1/4 wave length wire|
|Carrier Frequencies: Americas||UC14: 470.125 MHz to 541.875 MHz|
|UC30: 566.125 MHz to 607.875 MHz and 614.125 MHz to 637.875 MHz (not available in Brazil)|
|UC42: 638.125 MHz to 697.875 MHz|
|Carrier Frequencies: Europe, UAE, South Africa, Australia, Malaysia, Vietnam, New Zealand||CE21: 470.025 MHz to 542.000 (not available in Australia, Malaysia, Vietnam or New Zealand)|
|CE33: 566.025 MHz to 633.000 MHz (not available in New Zealand)|
|CE42: 638.025 MHz to 694.000 MHz|
|Carrier Frequencies: China||CN38: 710.025 MHz to 782.000 MHz|
|Carrier Frequencies: Thailand, Taiwan, Singapore||E: 794.125 MHz to 805.875 MHz|
|Carrier Frequencies: Japan||JB: 806.125 MHz to 809.750 MHz|
|Carrier Frequencies: South Korea||KR3: 925.125 MHz to 937.500 MHz|
|Frequency Response||23Hz to 18kHz (typical)|
|Signal-to-Noise Ratio||96dB (max deviation, A-weighted)|
|Distortion (T.H.D)||0.9% or less (-60dBV, 1kHz input)|
|Audio Delay||Approx. 0.375 msec|
|Analog Input||3-pole mini jack, unbalanced|
|Analog Input Level||-50dBV (±12dB Adjustable, 3-dB step)|
|Analog Output||3-pole mini jack, unbalanced|
|Analog Output Level||-60dBV (at ±5kHz deviation)|
|Analog Output Adjust Range||-12dB - +12dB (3dB step)|
|Headphone Output||f3.5 mm ( 5/32 inch) stereo mini jack|
|Headphone Output Level||5 mW (at 16-ohm load)|
|Pilot Tone Signal||32 kHz/ 32.382 kHz/ 32.768 kHz|
|Power Requirements||DC 3.0 V (with two AA-size alkaline (LR6) batteries)|
|DC 5.0V (via USB micro-B)|
|Battery Operating Time||Approx. five hours with Sony's AA-size alkaline (LR6) batteries at 25ºC (77ºF)|
|Operating Temperature||0°C to 50°C|
|32°F to 122°F|
|Storage/Transport Temperature||-20°C to +55°C|
|-4°F to +131°F|
|Dimensions||63 x 82 x 28.4 mm (excluding the anntenas) (W x H x D)|
|Mass||Approx. 210 g (including batteries)|