More Views
Rode VideoMic Pro with Rycote Lyre Shockmount
The VideoMic Pro is a shotgun microphone with a super-cardioid polar pattern designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio. It features a high resolution 0.5" condenser capsule that provides broadcast quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels).
It has a handle 134dB Max SPL and offers power, filter and level controls. The mic has a 40Hz-20kHz frequency response with a selectable high-pass filter at 80Hz. A standard sized shoe mount with a 3/8" thread in the base of the mount for boom pole mounting during on camera use comes as standard. VideoMic Pro is battery powered, and provides over 70 hours recording from a single 9V battery.
Features:
• Rycote® Lyre® shock mounting onboard
• All new capsule with lower noise and higher sensitivity
• Broadcast recording quality condenser microphone
• Compact form factor (150mm/6” length)
• Ultra lightweight (85g/3oz)
• 9V battery powered - over 70 hours use (alkaline)
• Integrated shock mounting
• Integrated foam windscreen
• 3.5mm stereo mini-jack output (dual mono)
• Two step High Pass Filter (flat, 80Hz)
• Three position level control (-10dB, 0, +20dB)
• Camera shoe mount with 3/8” thread for easy boompole mounting
It has a handle 134dB Max SPL and offers power, filter and level controls. The mic has a 40Hz-20kHz frequency response with a selectable high-pass filter at 80Hz. A standard sized shoe mount with a 3/8" thread in the base of the mount for boom pole mounting during on camera use comes as standard. VideoMic Pro is battery powered, and provides over 70 hours recording from a single 9V battery.
Features:
• Rycote® Lyre® shock mounting onboard
• All new capsule with lower noise and higher sensitivity
• Broadcast recording quality condenser microphone
• Compact form factor (150mm/6” length)
• Ultra lightweight (85g/3oz)
• 9V battery powered - over 70 hours use (alkaline)
• Integrated shock mounting
• Integrated foam windscreen
• 3.5mm stereo mini-jack output (dual mono)
• Two step High Pass Filter (flat, 80Hz)
• Three position level control (-10dB, 0, +20dB)
• Camera shoe mount with 3/8” thread for easy boompole mounting
| Acoustic Principle | Line Gradient |
| Directional Pattern | Super-Cardioid |
| Frequency Range | 40Hz ~ 20,000Hz (selectable HPF@80Hz) |
| Sensitivity | -32 dB re 1V/Pa (20mV @ 94dB SPL) 2dB @ 1KHz |
| Output Impedence | 200 |
| Equivalent Noise | 14dB (@ 1% THD into 1k) |
| Maximum Output | +6.9Bu |
| Dynamic Range | 120dB (as per IEC651) |
| Maximum SPL | 134dB (@ 1kHz, 1% THD into 1k load) |
| Signal/Noise | 80dB |
| Power | 9V alkaline battery (Current 7.8mA) |
| Dimensions | 75 x 100 x 170mm |
| Output Connection | 3.5mm stereo mini-jack (dual mono) |
| Weight | 85g |
