More Views

  • RODE MICROPHONES NTG4PLUS Røde NTG4+ Directional Condenser Microphone

Røde NTG4+ Directional Condenser Microphone

Details:

Røde NTG4+ Directional Condenser Microphone with Inbuilt Battery Estimated available date: Feb 2015.

Be the first to review this product

Sorry, this product is not currently available from Visual Impact. Call us on +44 (0)208 977 1222 for more information.

You may find a compatible alternative by clicking one of the categories below :

* Wired & Wireless Microphones & Accessories | Visual Impact
* Rode Microphones & Sound Equipment | Visual Impact

Building on the popularity and acceptance of the RØDE NTG2, the NTG4+ features an all-new condenser capsule with low noise, high sensitivity and the convenience of on-board equalisation/level control via digital switching. Perfect for DSLR videographers using XLR pre-amps or external recorders, or those using larger cameras with XLR inputs. Ideal for Run n' Gun situations with a DSLR sized camera for example and an external recorder which does not provide 48V Phantom power, in which case the built in battery will come in handy. Camera operators can choose the power the NTG4+ with phantom power as well, and the NTG4+ will automatically detect that its being fed 48V phantom power, therefore turning off the battery to perserve power. 


The NTG4+ is the very first microphone to feature an in-built battery that provides 150+ hours of operation with the convenience of USB charging.


Features:

  • Low noise circuitry
  • Internal rechargeable lithium battery, supplying over 150 hours operation
  • Fully charged in under two hours via MicroUSB
  • Rugged metal construction
  • Convenient digital switching
  • High Frequency Boost
  • High Pass Filter (Flat/75Hz)
  • PAD (-10db)
  • MicroUSB cable included

 

NTG4+ Specifications
Acoustic PrincipleLine Gradient
Capsule0.50"
Polar PatternSupercardioid – Picks up the front and sides and rejects 150 degrees to the rear.
Address TypeEnd
Frequency Range20Hz - 20kHz(selected HPF @75Hz)
Output Impedance200O
Maximum SPL135dB SPL (@ 1kHz, 1% THD into 1KO load)
Sensitivity-32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted)16dB-A
Power OptionsP12 - +12V phantom power required from mixer or interface
P24 - +24V phantom power required from mixer or interface
P48 - +48V phantom power required from mixer or interface
Inbuilt rechargeable battery
Weight176gm
Dimensions278mmH x 22mmW x 22mmD
Output3-pin XLR
Warranty1 year with free extension to 10 years following registration here
NTG4+ - Directional Condenser Microphone with Inbuilt Battery
RM5 - Durable Microphone Clip
ZP2 - Padded Zip Pouch (large)
Windshield - Windshield for NTG4 & NTG4+
Micro USB cable

Reviews