The SMAD-P3 is applicable to XDCAM Camcorder PXW-X70, PXW-X160, PXW-X180, PXW-X280, PXW-X200*, PXW-FS7 and PXW-FS5, a6000/ a6300*2, Handycam HXR-MC2500, FDR-AX100*2, NEX-VG900*2 & NEX-VG30*2, plus interchangeable lens digital camera a7*2/ a7R*2/ a7S*2/ a99*2, a7 Mark¿*2 / a7R Mark¿*2 / a7S Mark¿*2 and Cyber-shot DSC-RX10*2 (as of February 2016).
*PXW-X200 firmware should be upgraded to Ver.2.00 or later for using SMAD-P3.
*2 When using with these specific camera models, the power supply function and power ON/OFF control function will not be available. Insert new AA alkaline batteries in the receiver and set the receiver’s power select (POWER SEL) menu item to BATTERY mode. When the remaining battery indicator reaches one segment or less, insert new batteries immediately to avoid unexpected shutdown of the camera or data loss.
No need for separate XLR cable
Using an MI Shoe connection, the audio signal from a UWP-D11 or UWP-D12 wireless microphone package can be input from the wireless microphone receiver to the camera without an XLR cable.
Power can be supplied by camera
Power can be switched on and off from the camera/camcorder.