96 watt-hours, 14.8V 6.5Ah
Rechargeable V-Mount Li-Ion battery
Batteries in any state of charge can be linked to combine capacities (2 = 192Wh, 3 = 288Wh)
Current draw capability of 12A when linked (8A individually)
Hard-wearing, high-current contacts
Smaller design and higher energy density than any other comparable V-Mount Li-Ion battery
Auto-compatible with multiple camera data systems and in-viewfinder capacity displays (Sony, Red, etc)
Numeric Run-Time and Capacity Display
Batteries can be charged whilst linked
Charges on PAGlink, PAG V-Mount or Sony V-Mount Li-Ion chargers
Reveals status and usage data stored in microprocessor, for easier battery management
Battery software can be updated externally
UN tested and flight-friendly
2 year guarantee with no restrictive conditions
133 x 84 x 50mm / 0.73kg
The PL96T is a high-power, intelligent linking battery, and part of the PAGlink system.
PAGlink batteries can be used individually or linked to power a variety of cameras including: standard or high-definition broadcast cameras, 4K digital cinema and 3D camera set-ups, DSLRs and handheld camcorders.
PAGlink is the only system that allows you to combine the capacities of more than two batteries, in any state of charge, to achieve longer run-times or a higher current-draw capability. Up to eight batteries can be linked for charge or discharge - an industry first.
An individual PAGlink battery has a capacity of 96 watt-hours, making it unrestricted, in quantity, for air transportation. Linking two batteries doubles the capacity to 192Wh; three batteries provide 288Wh. No other system offers as much power.
Hard-wearing, heavy duty contacts are incorporated for high-current applications. The rated maximum continuous output is 12A when linked (8A individually). Other manufacturer’s so-called high-current technology offers only 10A.
Linked batteries form a high-speed network that enables them to communicate with each other, managing the output safely, and preventing the transfer of charge between batteries. Unlike other systems the linked batteries can be in any state of charge. PAGlink also allows batteries to be hot-swapped for constant, uninterrupted power.
v As well as being smarter, PAGlink batteries are smaller and lighter, with a higher energy density than any V-Mount system marketed to date.
PAGlink batteries feature long-life, premier-quality Li-Ion cells, which have no memory effect, and are completely recyclable. In keeping with PAG’s total battery design philosophy they are designed and constructed to provide the longest possible working life.
|Run-Time & Capacity Display||Numeric display that shows a run-time prediction on-load, expressed in hours and minutes, to a resolution of 1 minute. Capacity/state of charge is displayed as a percentage, in 1% increments.|
|Construction||High-impact polycarbonate injection moldings designed to protect the cells from impact damage.|
|Replaceable Assembly||The rear contact assembly can be replaced if damaged.|
|Cells||Premium grade Lithium-Ion sealed rechargeable cylindrical cells.|
|Voltage||14.8V nominal. 12 cells connected in series/parallel. Each cell has a nominal voltage of 3.7V.|
|Capacity||96 Watt-hours, nominal 6.5 Ampere-hours.|
|Output Current||Rated maximum continuous output current 8 Amperes (12 Amperes for two or more linked batteries).|
|Protection||The multi-layered electronic protection system guards against over-current, over-voltage, under-voltage, over-temperature and under-temperature. The protection system circuit is conformally-coated to protect it, and ensure operation of the safety systems in the event of damage to the battery.|
|Charging||0°C to +45°C (Optimum +10°C to +40°C)|
+32°F to +113°F (Optimum +50°F to +104°F)..
|Discharging||-20°C to +50°C (Optimum +10°C to +40°C).|
-4°F to +122°F (Optimum +50°F to +104°F)
|Storage||-10°C to +40°C (Optimum 0°C to +20°C).|
+14°F to +104°F (Optimum +32°F to +68°F)