MICROPHONE-MODULE
The ME 66 is a shotgun microphone head designed for use with the K6 and K6P powering modules. It is especially suitable for reporting, film and broadcast location applications and for picking up quiet signals in noisy or acoustically live environments as it discriminates against sound not emanating from the main pick-up direction. Matt black, anodised, scratch-resistant finish.
Features
Super-cardioid/lobar pick-up pattern
Highly directional
Low inherent self-noise
High sensitivity
Wide frequency response
The ME 66 is a shotgun microphone head designed for use with the K6 and K6P powering modules. It is especially suitable for reporting, film and broadcast location applications and for picking up quiet signals in noisy or acoustically live environments as it discriminates against sound not emanating from the main pick-up direction. Matt black, anodised, scratch-resistant finish.
Features
Super-cardioid/lobar pick-up pattern
Highly directional
Low inherent self-noise
High sensitivity
Wide frequency response
Technical Data
Transducer principle (Microphone) : pre-polarised condenser microphone
Pick-up pattern : super-cardioid/lobar
Frequency response (microphone) : 40.....20000 Hz +- 2,5 dB
Sensitivity in free field, no load (1kHz) : 50 mV/Pa +- 2,5 dB
Dimensions : d 22,5 x 221 mm
Min. terminating impedance : 1000 Ohm ( K6)
Equivalent noise level : 10 dB
Equivalent noise level weighted as per CCIR 468-3 : 21 dB
Maximum sound pressure level (passiv) : 125 dB / 1 kHz (K = 1%)
Nominal impedance : 200 Ohm (K6)
Transducer principle (Microphone) : pre-polarised condenser microphone
Pick-up pattern : super-cardioid/lobar
Frequency response (microphone) : 40.....20000 Hz +- 2,5 dB
Sensitivity in free field, no load (1kHz) : 50 mV/Pa +- 2,5 dB
Dimensions : d 22,5 x 221 mm
Min. terminating impedance : 1000 Ohm ( K6)
Equivalent noise level : 10 dB
Equivalent noise level weighted as per CCIR 468-3 : 21 dB
Maximum sound pressure level (passiv) : 125 dB / 1 kHz (K = 1%)
Nominal impedance : 200 Ohm (K6)