When the Tiffen 4 x 5.65" T1 IR Filter is used, near-infrared light waves beginning at 680nm are blocked by approximately 55%. Infrared light waves at higher frequencies are further impeded until nearly flat attenuation is achieved at 725 to 800nm. This process helps to ensure that the light that falls on the camera's sensor is limited to the visible spectrum. Potential near-infrared or infrared color shifts are prevented or minimized, which preserves color accuracy throughout the frame. While a Tiffen T1/2 IR Filter that blocks infrared light waves down to 775 nanometers is sufficient for many cameras, others may have sensors that require a higher degree of near-infrared and infrared control, such as that provided by a Tiffen T1 IR Filter.
This filter is constructed from Water White glass for increased clarity as well as color fidelity. It is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass, grinding flat to a tolerance of 1/10,000th of an inch.
Designed for use with CCD or CMOS sensors to filter out near-infrared and infrared light pollution that cause color shifts frequently associated with high-definition recording
Blocks near-infrared light waves beginning at 680nm by approximately 55% until nearly flat infrared attenuation is achieved at 725 to 800nm
Constructed from Water White glass for increased optical clarity
No dichroic coatings to further ensure color accuracy
1.5x filter factor reduces exposure by 0.6 stops
Padded pouch included for storage and transport