More Views

  • SONY UWP-X7/62 UHF Wireless Pack with UTX-B2

UHF Wireless Pack with UTX-B2

Details:

UHF Wireless Pack with UTX-B2

Be the first to review this product

Sorry, this product is now discontinued and cannot be ordered

You may find a compatible alternative by clicking one of the categories below :

* Others

UHF Wireless Pack with UTX-B2 bodypack, URX-M2 module for using with MB-X6 receiver frame, lavalier microphone and acessories, TV-channel 62-64, 798-822MHz

URX-M2 Modular Receiver

Signal-to-noise ratio : 60 dB or more (±5 kHz deviation at 1 kHz modulation, A-weighted)

Reference deviation : ±5 kHz (at 1kHz modulation)

Audio output : Multi-pin

Power requirements : DC 9.0 Volts provided by MB-X6, SPR-X500P or SRP-X700P

Dimension (W x H x D) : 57 x 26 x 121 mm (2 1/4 x 1 1/16 x 4 7/8 inches )

Mass : Approx. 150g (5.3 oz)

Operating frequencies CE : 798 MHz - 822 MHz (UWP-X7/62)
838 MHz - 862 MHz (UWP-X7/67)

Operating frequency band CE : 24 MHz BW

Type of reception : Space diversity

Frequency response : 40 Hz - 18 kHz

UTX-B2 Belt-pack Transmitter

Operating frequencies CE : 798 MHz - 822 MHz (UWP-X7/62)

838 MHz - 862 MHz (UWP-X7/67)

Operating frequency band CE : 24 MHz BW

Pre-emphasis : 50 micro-seconds

Frequency response : 40 Hz - 18 kHz

RF power output : 30 mW / 5 mW

Audio attenuator adjustment range : 0 - 21 dB (in 3 dB steps)

Audio input connector : 3-pole mini jack

Power requirements : DC 3.0 V (two LR6/AA size alkaline batteries)

Battery life : Approx. 8hours with Sony AA-size alkaline (LR6) batteries at 25 degrees C (77 degrees Farenheit )at 30 mW output.

Dimension (W x H x D) *excluding the antennas : 63 x 82.5 x 18.7 mm (2 1/2 x 3 1/4 x 3/4 inches )

Mass * including batteries : Approx. 145g (5.1oz)

Reviews