HDVF-200 (Used)
HDVF-200 ( hdvf200 )
2-inch HD viewfinder for Sony 2/3-inch HD cameras/camcorders
The HDVF-200 is a low cost eye-piece type viewfinder.
Tally lights front and rear
Front tally lights up when the camera/camcorder receives a tally control signal. Rear tally lights up when the camera/camcorder receives a tally control signal.
Tally indicator (rear)
Lights up when the camera/camcorder receives a tally control signal. This indicator can be covered when not in use.
Tally indicator (front)
Lights up when the camera/camcorder receives a tally control signal. Set the TALLY switch 9 to OFF when not in use. The brightness can also be adjusted with the TALLY switch 9.
Peaking control
Turning this control clockwise adjusts the picture sharpness, and makes focusing easier. This control has no effect on the output signals of the camera/ camcorder.
Contrast control
Adjusts the contrast of the screen. This control has no effect on the output signals of the camera/camcorder.
Bright control
Adjusts the brightness of the screen. This control has no effect on the output signals of the camera/ camcorder.
Tally switch
Controls the tally indicator 5 located on the front of the viewfinder. HIGH: The tally indicator brightness is set to high. OFF: The tally indicator is disabled. LOW: The tally indicator brightness is set to low.
Zebra (zebra pattern) switch
Controls the zebra pattern display on the viewfinder screen as follows: ON: A zebra pattern appears and stays. OFF: The zebra pattern disappears. MOMENT: A zebra pattern appears and stays for about 5 seconds.
Diopter adjustment ring
Allows for optimal focus adjustment.
The HDVF-200 is a low cost eye-piece type viewfinder with a tally lights front and rear. Front tally lights up when the camera/camcorder receives a tally control signal. Rear tally lights up when the camera/camcorder receives a tally control signal.HDVF-200 Features
Tally indicator (rear)
Lights up when the camera/camcorder receives a tally control signal. This indicator can be covered when not in use.
Tally indicator (front)
Lights up when the camera/camcorder receives a tally control signal. Set the TALLY switch 9 to OFF when not in use. The brightness can also be adjusted with the TALLY switch 9.
Peaking control
Turning this control clockwise adjusts the picture sharpness, and makes focusing easier. This control has no effect on the output signals of the camera/ camcorder.
Contrast control
Adjusts the contrast of the screen. This control has no effect on the output signals of the camera/camcorder.
Bright control
Adjusts the brightness of the screen. This control has no effect on the output signals of the camera/ camcorder.
Tally switch
Controls the tally indicator 5 located on the front of the viewfinder. HIGH: The tally indicator brightness is set to high. OFF: The tally indicator is disabled. LOW: The tally indicator brightness is set to low.
Zebra (zebra pattern) switch
Controls the zebra pattern display on the viewfinder screen as follows: ON: A zebra pattern appears and stays. OFF: The zebra pattern disappears. MOMENT: A zebra pattern appears and stays for about 5 seconds.
Diopter adjustment ring
Allows for optimal focus adjustment.
HDVF-200 ( hdvf200 )
2-inch HD viewfinder for Sony 2/3-inch HD cameras/camcorders
The HDVF-200 is a low cost eye-piece type viewfinder.
Tally lights front and rear
Front tally lights up when the camera/camcorder receives a tally control signal. Rear tally lights up when the camera/camcorder receives a tally control signal.
Tally indicator (rear)
Lights up when the camera/camcorder receives a tally control signal. This indicator can be covered when not in use.
Tally indicator (front)
Lights up when the camera/camcorder receives a tally control signal. Set the TALLY switch 9 to OFF when not in use. The brightness can also be adjusted with the TALLY switch 9.
Peaking control
Turning this control clockwise adjusts the picture sharpness, and makes focusing easier. This control has no effect on the output signals of the camera/ camcorder.
Contrast control
Adjusts the contrast of the screen. This control has no effect on the output signals of the camera/camcorder.
Bright control
Adjusts the brightness of the screen. This control has no effect on the output signals of the camera/ camcorder.
Tally switch
Controls the tally indicator 5 located on the front of the viewfinder. HIGH: The tally indicator brightness is set to high. OFF: The tally indicator is disabled. LOW: The tally indicator brightness is set to low.
Zebra (zebra pattern) switch
Controls the zebra pattern display on the viewfinder screen as follows: ON: A zebra pattern appears and stays. OFF: The zebra pattern disappears. MOMENT: A zebra pattern appears and stays for about 5 seconds.
Diopter adjustment ring
Allows for optimal focus adjustment.
The following applies to a new product and may differ to the used item you are viewing, especially regarding included accessories (see above for used details which may differ). Please contact us at customerservice@visuals.co.uk for more information.
2-inch HD viewfinder for Sony 2/3-inch HD cameras/camcordersThe HDVF-200 is a low cost eye-piece type viewfinder with a tally lights front and rear. Front tally lights up when the camera/camcorder receives a tally control signal. Rear tally lights up when the camera/camcorder receives a tally control signal.HDVF-200 Features
Tally indicator (rear)
Lights up when the camera/camcorder receives a tally control signal. This indicator can be covered when not in use.
Tally indicator (front)
Lights up when the camera/camcorder receives a tally control signal. Set the TALLY switch 9 to OFF when not in use. The brightness can also be adjusted with the TALLY switch 9.
Peaking control
Turning this control clockwise adjusts the picture sharpness, and makes focusing easier. This control has no effect on the output signals of the camera/ camcorder.
Contrast control
Adjusts the contrast of the screen. This control has no effect on the output signals of the camera/camcorder.
Bright control
Adjusts the brightness of the screen. This control has no effect on the output signals of the camera/ camcorder.
Tally switch
Controls the tally indicator 5 located on the front of the viewfinder. HIGH: The tally indicator brightness is set to high. OFF: The tally indicator is disabled. LOW: The tally indicator brightness is set to low.
Zebra (zebra pattern) switch
Controls the zebra pattern display on the viewfinder screen as follows: ON: A zebra pattern appears and stays. OFF: The zebra pattern disappears. MOMENT: A zebra pattern appears and stays for about 5 seconds.
Diopter adjustment ring
Allows for optimal focus adjustment.