More Views

  • HDCU-1000//U

HDCU-1000//U

Details:

HD Camera Control Unit

Be the first to review this product

Exc VAT Price £17,039.00
Inc VAT Price £20,446.80
Cat no. HDCU-1000//U
Status

Available to order

FREE SHIPPING WITH THIS ITEM

HD Camera Control Unit

Audio

MIC1/MIC2 output : XLR-3-31 type (2, female), 0/-20 dBu selectable

Digital audio output (AES/EBU) : BNC type (1), AES/EBU format, 20-bit/48 kHz

Embedded audio : Embedded audio to HD SDI/SD SDI

Camera

Optical fibre cable interface : SMPTE 304M based optical fiber connector (1), 1.5 gb/s optical fiber digital transmission, SMPTE 292 M

General

Operating temperature : +5 to +40 °C (+41 to +104 °F)

Mass : Approx. 16 kg (35 lb 4 oz)

Dimensions (W x H x D) : 424 x 133 x 410 mm (16 3/4 x 5 1/4 x 16 1/4 inches)

Power requirements : AC 100/120/220 to 240 V, 50/60 Hz

Maximum current consumption : 5.4 A (at 100 V AC, entire system active)

HD inputs/outputs

SDI output : BNC type (4), SMPTE 292M, 1080/50i, 60i, 30P, 25P, 24P, 720/60P, 50P Outputs are selectable as HD SDI or SD SDI

Monitor output : BNC type (4), SMPTE 292M, 1080/50i, 60i, 30P, 25P, 24P, 720/60P, 50P Outputs are selectable as HD SDI or SD SDI, character on/off selectable

Analogue composite monitor output : BNC type (1), character on/off selectable

HD SDI return input : BNC type (4), SMPTE 292M, 1080/50i, 60i, 30P, 25P, 24P, 720/60P, 50P

SDI return input : BNC type (4), SMPTE 259M, Serial digital component

VBS return input : BNC type (4), NTSC/PAL

Intercom/Tally/PGM

Intercom PD & ENG : D-sub 25-pin (1), 4W/RTS/CC selectable

PGM1/PGM2 : 0/-20 dBu selectable

R-Tally/GTally : 24 V power in/make contact

Others

RCP/MSU/CNU interface : 8-pin (1), Sony Camera Command Network Protocol (for entire camera system control)

Ethernet : RJ-45 (1), 10BASE-T/100BASE-TX

Mic remote : D-sub 15-pin

WF mode : 4-pin (2), Stair step (for SD composite Waveform monitor)

WF control : D-sub 15-pin (1), GPI (for SDI component WF control)

System expansion I/Q : D-sub 15-pin (1), GPI (for system control with external GPI interface)

Trunk line : D-sub 9-pin (1), RS-232C (remote line for CHU equipment), 12-pin (round type connector), RS-232C/422 (remote line for CHU equipment)

Prompter

Prompter in : BNC type (2, with loop-through), Analogue, NTSC/PAL/HD-Y

Sync

Reference input : BNC type (1, with loop-through), HD tri-level sync or SD black burst

Sync output : BNC type (1), HD tri-level sync or SD sync

Reviews