2-3 Pull Down opt board for HDW-F900R
HKDW-902R is a down converter board for the HDW-F900R Provides the HDW-F900R with down-converted Standard Definition output, and on-set SD monitoring of 1080/23.98P signals on a conventional NTSC monitor. Enables SD output to the camcorder's viewfinder or a monitor connected to the camcorder during 23.98P recording
- The unit can get used in squeeze, letterbox or crop modes for SD viewing.
- Down converter that now incorporates 3:2 pull-down for on set SD monitoring.
Down-converts 1080/23.98P HD signals to SD signals via 2-3 pull-down circuitry allowing on-set SD monitoring of 1080/23.98P signals on a conventional NTSC monitor. This board also enables SD output to the camcorder's viewfinder or a monitor connected to the camcorder during 23.98P recording. With this function, users can check images on the viewfinder or monitor without the flickers that usually occur from 23.98P recording. For the down-converted SD signal, SD-SDI or analog composite can be selected via the camcorder's set-up menu. Note: when outputting down-converted SD signals, one of the HD-SDI output connectors on the HDW-F900R will be utilized.
There is 1 used item available