The 526 offers our most precise fluid drag system comprised of three step settings for low, medium and high drag levels (numbered 1, 2 and 3), plus the additional no-drag setting (number 0) for such occasions as snap-pans/tilts. Counterbalance is achieved through an adjustable spring for camera weights between 17.5 and 33 lbs. The built-in 4-inch half-ball adapts to a number of our tripods with a 4-inch receiver, allowing the quick leveling of the camera with the aid of the bright leveling bubble. The 526 comes with one pan arm and the long 357PLV plate. Manfrotto 526 replaces Manfrotto 3274.
This products is warranted to be fit for the purpose for which it has been designed, and to be free from defects in materials and workmanship. This guarantee does not cover the product against subsequent damage or misuse. The period of validity of the Standard Limited Warranty is defined by the law in force in the country, state or region where the product is sold. Please retain your receipt as proof of purchase to repair your product under warranty.
How to get an extra 3 years' warranty coverage
Beyond the standard compulsory coverage outlined above, this product is eligible for a warranty extension up to 3 years. The Limited Conventional Warranty Extension does not affect the standard compulsory coverage. To take advantage of the warranty extension scheme, you must register your purchase at warranty.manfrotto.com.
|additional pan handle||519LV|
|attaches by.||1/4'' and 3/8'' screws attachment type|
|attachment||3/8'' screw attachment type|
|balance control||one fix spring adjustable from 8 to 15kg|
|bubble spirit level (no.)||1 number|
|Center Of Gravity||125 mm|
|Counterbalanced Weight||15 kg|
|front tilt||-70° / +75° tilt range|
|independent pan lock||yes|
|independent tilt lock||yes|
|maximum working temperature||60 °C|
|minimum working temperature||-20 °C|
|pan bars included (no.)||1 number|
|pan drag||0 plus 3 step|
|panoramic rotation||360 °|
|Safety Payload Weight||16 kg|
|secondary safety system||yes|
|sliding travel of plate||80 mm|
|tilt drag||0 plus 3 step|
|working height||15 cm|