More Views

  • OCONNOR C1030D-30L-F 1030D Head & 30L Tripod with Floor Spreader & Case
  • OCONNOR C1030D-30L-F 1030D Head & 30L Tripod with Floor Spreader & Case
  • OCONNOR C1030D-30L-F 1030D Head & 30L Tripod with Floor Spreader & Case

1030D Head & 30L Tripod with Floor Spreader & Case

Details:

The Ultimate 1030D Fluid Head & 30L Tripod System from OConnor
  • Payload & Counterbalance
  • Pan and Tilt Controls
  • Ball Leveling
  • Front Box & Accessory Mounting
  • Springloaded sideload camera platform

Be the first to review this product

Exc VAT Price £4,996.00
Inc VAT Price £5,995.20
Cat no. OCONNOR-C1030D-30L-F
Status

Available to order

FREE SHIPPING WITH THIS ITEM

The Oconnor Ultimate 1030D Fluid Head Is a lightweight fluid head that shares features with the other fluid heads in the OConnor Ultimate fluid head line. This allows operators to easily transition between lighter and heavier cameras without having to relearn think about the differences between fluid heads.

The head supports 30 pounds worth of camera and accessories at a C.O.G. (center of gravity) 6 inches above the camera platform. The counterbalance system helps prevent the camera from tilting forward or back on the head on its own, and to remain in the position the operator places it without requiring additional effort to hold it in place. The counterbalance system on the 1030D is a stepless system, so it is continuously variable from the maximum weight the head can support all the way down to zero. This makes the 1030D extremely versatile, and suitable for use with heavy ENG style cameras all the way down to lightweight cameras, while maintaining the same operational feel.

The 1030D features interchangeable camera platforms, and comes with a sidelock platform and sliding baseplate as standard. The sidelock platform allows you to mount and remove the camera by lifting straight off the head and not having to slide it in from the back. The fluid head is able to tilt 90 degrees forward and back, allowing you to tilt the camera straight down and then straight up, all in the same shot.

The camera also features independent drag controls and locks for both the pan and tilt. The included 100mm ball base is removable and can be replaced with other available bases. The head features an integrated bubble level for quick leveling confirmation, and the level is illuminated for times you are working in dim light conditions. The included pan handle can be attached to either side of the the fluid head utilizing the mounting rosette on either side of the head. The 1030D also features standard front box mounting points compatible with available front box brackets, and provisions for attaching an eyepiece leveler or other attachments to the head.

Payload & Counterbalance
The 1030D supports cameras and accessories up to 30 pounds at a C.O.G. of 6 inches. This is what the counterbalance can cancel out and keep the head neutral in any position in the tilt range. Lighter camera systems can be mounted with a taller C.O.G., while heavier camera systems are required to be mounted closer to the fluid head's camera platform so that the counterbalance can do its job. OConnor specs out 24 pounds at a C.O.G. above platform of 8 inches and 39 pounds at 4 inches. These are the maximum weights, and the stepless counterbalance can be set all the way down to zero to accommodate lightweight cameras.

Camera Platform
The included springloaded sideload camera platform allows you to more easily insert and remove the camera when mounted on a the sliding baseplate, similar to what is available with touch and go plates. However with the sideload platform you get the advantages of a touch and go quick release system, while still being able to use the base plate to balance the camera. Additional the sideload camera platform includes its own forward and back sliding adjustment. This provides you with additional balancing adjustment than just using the sliding baseplate alone.

Tilt Range
The 1030D provides 90 degrees of forward and back tilt, while supporting camera packages weighing up to 30 pounds (6" C.O.G.) This very wide tilt range is accomplished while supporting camera packages that vary from very lightweight up to 30 pounds.

Pan and Tilt Controls
The head features independent controls on the pan and tilt for lock and drag. The pan and tilt locks are easy to operate, requiring only the squeeze of a single hand. The pan lock has also been re-designed from earlier versions of the 1030 fluid head, and now matches the arrangement found on other heads in the Ultimate fluid head line.

Ball Leveling
The included 100mm ball base provides a side support base that easily accommodates the heavy loads this fluid head can support. The ball allows you to quickly level your shot without having to adjust the tripod legs. The ball base is also removable and available options include either a Mitchell base or 150mm ball base.

Illuminated Bubble Level
The built-in bubble level aids you in leveling your shot. A press of the button, and the bubble level will light up for approximately 25 seconds for working in dim lighting conditions. The battery is easily replaceable, and the head comes with a battery installed and tested at the factory.

Front Box & Accessory Mounting
The included front box mounting points allow you to attach an available front box with front box bracket to your fluid head, providing you with high end accessory mounting features. There are also accessory mounting points on the rear of the fluid head that allow you to attach available accessories such as an eyepiece leveler bracket.

Ultimate 1030D Fluid Head
Load Capacity39 lb (17.7 kg) at C.O.G. 4" (10.2 cm) above camera platform
30 lb (13.6 kg) at C.O.G. 6" (15.2 cm) above camera platform
24 lb (10.9 kg) at C.O.G. 8" (20.3 cm) above camera platform
Counter Balance SystemContinuous
Counter Balance Range0 lb to Max Payload at C.O.G.
Balance PlateSliding Balance Plate
Tilt Range+90 to -90°
Tilt DragContinuously adjustable from 1 to 5
Tilt LockYes
Pan Range360°
Pan DragContinuously adjustable from 1 to 5
Pan LockYes
Leveling Bubble / IlluminatedYes / Yes
Mounting Base100 mm ball base (interchangeable)
Tie DownTripod Tie Down Screw: 10 x 1.5mm
Height6.6" (16.8 cm) including camera platform
Weight8.7 lb (3.9 kg)

30L Two Stage Carbon Fiber Tripod Legs
Leg Stages / Sections2 Stage
Height RangeMaximum: 61.8" (157 cm)
Minimum: 22.0" (56 cm)
Load Capacity209 lb (95 kg)
Head Attachment Fitting100 mm Ball Base
MaterialLegs: Carbon Fiber
Head Attachment Fitting: Aluminum
Leg Lock TypeLever clamp
SpreaderMid level, removable
Note: Spreader not included
Independent Leg SpreadYes (when spreader is removed)
Spiked / Retractable FeetDual spikes
Collapsed Height29.5" (75 cm)
Weight8.8 lb (4 kg)

Floor Spreader for 30L / 60L Tripod
MaterialSBR and PA
CompatibilityOConnor 30L & 60L tripod systems
All Sachtler 100 & 150 bowl tripods (excluding DA 100 K, DA 150 K, and Cine)
LengthMinimum Leg Spread: 13.8" (25 cm)
Maximum Leg Spread: 22.8" (58 cm)
Weight3.6 lb (1.6 kg)

C1254-0001 SOFT Carrying Case for 1030 Systems with 30L Tripod (Black)
AccommodatesFor 1030 systems with 30L tripods
Type of ClosureZipper
PaddedYes
Carrying / Transport OptionsTop straps
Dimensions9.3 x 7. 9 x 42.0" / 23.5 x 20.0 x 106.0 cm
  • Ultimate 1030D Fluid Head
  • Sideload Quick Release Top Platform with Camera Plate
  • 1030-246 12" Pan Handle with 30 degree bend
  • 2575-135 11.5" Pan Handle Extension
  • 08395 100mm-Tie Down
  • 08365 100mm Ball Base Adapter
  • CR 2032 Battery (Installed at the Factory)
  • 30L Two Stage Carbon Fiber Tripod Legs - C1251-0001
  • Floor Spreader for 30L / 60L Tripod - C1258-0001
  • C1254-0001 SOFT Carrying Case for 1030 Systems with 30L Tripod (Black)

Reviews


Finance

Term of finance
(months)
Monthly paymentAdmin charge
(paid with first payment)
Add To cart
60£114.91  +VAT£100.00  +VAT
48£134.95  +VAT£100.00  +VAT
36£168.78  +VAT£100.00  +VAT
24£237.11  +VAT£100.00  +VAT
12£455.22  +VAT£100.00  +VAT



How finance works:
1. Add products you would like to purchase to the basket (min total of £1000.00 without VAT).2. In payment method choose “Finance your order with Azule finance”3. Fill in the form (it takes less than 3 minutes) and choose a suitable term of finance.4. Once submitted you will receive an instant decision with further instructions

About Azule:
Affording Creativity, that’s our moto. We strive to help our customers achieve their true, creative potential and take risks with those willing to grow their business. For over 10 years we’ve been financing equipment for film, stills and broadcast specialists in the UK and across Europe. We’re here to offer fast reliable funding solutions to match your equipment requirements.1. WE are a friendly, approachable team; happy to offer you help and advice whenever you need it2. YOU only need to fill out a very quick and simple online form that takes 3 minutes3. YOU will either receivean instant application decision, or a response within 24 hours4. WE have 25 years of specialist industry experience covering broadcast, media, AV and photography5. WE will always do our best to find a solution to even the most complicated deals6. YOU can apply for finance through Azule from anywhere in Europe

Benefits of a lease
You use the kit over an agreed period Your payments can be offset against tax You pay VAT on each monthly instalment