The HC-PL94T features a numeric run-time and capacity display which maintains accuracy by tracking performance and adjusting calibration values to compensate for the aging of the cells. Run-time is expressed in hours and minutes and can be switched to a percentage figure. When linked for use, run-time is displayed for the entire pack. When being charged, each battery displays its individual status. The display characters can be changed at the press of a button for the character type more legible for you.
The battery cells have no memory effect and are completely recyclable. The case is made from high-impact, injection-molded polycarbonate, which is used for motorcycle helmets, and the interior of the case is designed to protect the cells from damaging impact. The battery uses a fail-safe electronic system with an electrolyte-resistant coating on its protection circuit. The system features three over-current, two over-voltage, two under-voltage, and three thermal safety shutdown systems, including a non-resetting thermal fuse. To support a long working life, the battery's front and rear contact assemblies are external to the battery case and can be replaced if damaged. PAGlink batteries are capable of working in temperatures as low as -20°C.
The HC-PL94T is UN tested and is unrestricted in quantity by air transport legislation. You can carry as many with you on board as you can fit in your hand-luggage. The HC-PL94T can only be linked with other The HC-PL94T Gold Mount units.
14.8V, 94Wh Gold Mount lithium ion battery
Multiple units can be linked together for higher current draw and longer run times
Single unit supports 10A draw; two units combine to support 12A draw
Numeric run-time (hh/mm or %) and capacity display with accuracy maintenance feature
When multiple units are linked, run-time is displayed for the entire group
Capable of sending capacity data to all supporting cameras
No memory effect
High-impact, injection-molded polycarbonate case
Case interior designed to prote
Box Dimensions (LxWxH) 6.5 x 3.8 x 2.4" Mount Type Gold Mount Voltage 14.8 V nominal; (12 sealed cylindrical cells connected in series/parallel. Each cell has a nominal voltage of 3.7 V)
Chemistry Lithium ion
Capacity Nominal: 6.4 Ah, 94 Wh
Output Current Rated Maximum Continuous Output Current: 10 A, 120 - 150 W; (For Two or More Linked Batteries: 12 A, 150 - 180 W)
Charge Voltage 16.8 V
Charging Temperature 32 to 104°F (0 to 40°C); Optimum: 50 to 86°F (10 to 30°C)
Discharging Temperature -4 to 122°F (-20 to 50°C); Optimum: 41 to 104°F (5 to 40°C)
Storage Temperature 14 to 104°F (-10 to 40°C); Optimum: 32 to 68°F (0 to 20°C)
Dimensions 5 x 3.4 x 2.3" (12.7 x 9.4 x 5.8 cm)
Weight 1.6 lb (0.7 kg)