Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (105gm/3.7oz) makes it an ideal boom microphone.
In addition to the NTG1 native 20Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.
The RØDE NTG1 shotgun microphone is covered by RØDE Microphones' industry leading 10 year warranty.
Acoustic Principle Line Gradient
Active Electronics JFET impedance convertor with bipolar output buffer
Address Type End
Frequency Range 20Hz - 20kHz
Output Impedance 50O
Maximum SPL 139dB SPL (@ 1kHz, 1% THD into 1KO load)
Maximum Output Level 6.9dBu (@ 1kHz, 1% THD into 1KO load)
Sensitivity -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 18dB-A
Dimensions 219.00mmH x 22.00mmW x 22.00mmD
Acoustic Principle : Line gradient
Dimensions : 217mmH x 22mmW x 22mmD
Directional Pattern : Super Cardioid
Equivalent noise : 18 dB SPL (A - weighted per IEC651)
Frequency range : 20Hz-20kHz, selectable HPF @ 80Hz/12dB/octave
Maximum SPL : 139dB SPL (@ 1kHz, 1% THD into 1KO load)
Maximum output voltage
Maximum output voltage : -15.4dBu (@ 1kHz, 1% THD into 1KO load)
Output impedance : 50O
Power : P48 (48V) phantom supply